Whole Tap Iron Removal Filter and Iron Guard – Heavy Duty

₹ 2,360

Cost‑effective solution to remove iron from bathing water and faucets. Heavy‑duty 20" polypropylene cartridge. Easy to install - DIY. Ships across India.

Buy Now

Product Code: PARAS0009

Removes ferrous iron and suspended dirt effectively
20" polypropylene cartridge - long life (approx. 6 months depending on water quality)
Quick, tool-free cartridge change - no plumber required
Suitable for bathroom taps, faucets and pre-filtration for drinking water

Descriptions of Whole Tap Iron Filter for Bathroom

All you need to do is to fix the input of the filter to the output of your tap or faucet with the soft pipe, and get clean, iron free water flowing out from the other end, which you can use for bathing, for your shampoo, for cleaning floors, washing clothes, etc. You can also use the water for washing vegetables, rice and dal, before you cook them. When the filter cartridge gets clogged due to iron and dirt, the flow of the output water will reduce, and you will need to change the cartridge residing inside the blue housing. It can be done very easily, and by hand, without taking the service of any plumber.

The filter carries a long 20inch, high quality polypropylene filter, safe for drinking water pre filter use as well, and can run for months, being heavy duty in nature. It is a very successful product from Parashu^®, and you will love the clean, iron free water coming out of this iron guard iron water filter.

It's easy to fix, and you should be able to do it yourself. Just attach this to your existing bathroom tap, and get clean, iron free water for bathing, shampooing etc.

Technical Details

Name	Description
Title	Whole Tap Iron Remover
Size	55.9 x 10.2 x 10.2 cm
Complexity	Very simple to install, Do it Yourself.
Cartridge	20" polypropylene (spun/wound options available)
Flow Rate	Up to 8 - 12 LPM (depends on inlet pressure)
Operating Pressure	0.5 - 4.0 bar (typical)
Price	Check the link below
Life	~6 months (varies by water iron content)

How to install

Turn off tap. Remove existing aerator if necessary.
Connect inlet of filter to faucet using provided soft pipe and clamp.
Place outlet to where you want iron-free water to flow. Turn on and check for leaks.
Replace cartridge when flow reduces or monthly visual check indicates clogging.

FAQ

Will this remove manganese?

Primary performance is against ferrous iron and suspended iron. For dissolved manganese, a specialised media may be needed - contact our support for site‑specific advice.

Can I use it for my kitchen tap and washing vegetables?

Yes - the cartridge is safe as a pre‑filter for cooking and washing produce, but ensure timely cartridge changes to maintain water quality.

How often should I replace the cartridge?

Typically ~6 months depending on iron levels and usage. If flow reduces significantly, replace earlier.

You should also buy an extra original cartridge by clicking any of the buttons below.

Buy Span Cartridge Buy Wound Cartridge